Representing Process Engineering International, LLC (USA) in Pakistan
Our Services · Process Safety

Process Safety

Process hazard analysis, relief systems, functional safety and process safety management from chemical engineers who understand the process.

Overview

Process Safety Engineering Grounded in Process Chemistry

Chemical and industrial facilities handle flammable, toxic and reactive materials at conditions that can cause fires, explosions and toxic releases if containment is lost. Identifying and managing these process risks is essential to protecting people, assets and the environment.

PEI evaluates safety issues through the lens of process chemistry, unit operations, equipment design, operations, utilities, controls and plant constraints — and translates findings into realistic, actionable engineering and operating recommendations rather than generic compliance observations.

Process Hazard Analysis (PHA)

  • HAZOP facilitation and participation
  • HAZID studies
  • What-If reviews
  • FMEA reviews
  • LOPA (Layer of Protection Analysis)
  • Safeguard reviews
  • Action item resolution support

Functional Safety

  • SIS evaluations
  • SIL determination support
  • SIL verification reviews
  • Safety Instrumented Function reviews
  • Interlock assessments
  • Emergency shutdown system reviews

Relief Systems & Flare Engineering

  • Pressure relief analysis and design
  • PSV sizing and relief valve evaluations
  • Flare header studies
  • Relief system revalidation
  • Hydraulic analysis
  • Overpressure protection reviews

Process Safety Management (PSM)

  • PSM development, audits and implementation
  • Process Safety Information development
  • Gap assessments
  • Management of Change reviews
  • Pre-Startup Safety Reviews (PSSR)
  • OSHA PSM and EPA RMP support (U.S. frameworks)

Specialized Safety Evaluations

Dust Hazards Analysis (DHA)
Electrical (hazardous) area classification
Plant layout and spacing assessment / facility siting
Consequence screening analysis
Dispersion modeling
Chemical compatibility matrices
Chemical safe handling and design assessments
Alarm rationalization
Root cause analysis / incident investigation
NFPA compliance assessments (NFPA 30, 400, 660)
IBC / IFC hazardous materials compliance assessments
Flammable / combustible liquid and ventilation assessments

Operational Safety Support & Training

  • Operating procedure development
  • Lockout / tagout procedure support
  • Safe operating limit support
  • As-built P&ID preparation
  • Occupational exposure limit considerations and PPE protocol support
  • On-site customized process safety training for operators and engineering staff

Typical Situations

  • HAZOP / LOPA / PSSR support for new or modified processes
  • Periodic revalidation of existing process hazard analyses
  • Relief system revalidation after capacity increases or process changes
  • Process safety program improvement and action item closure
  • Investigation of incidents or recurring process safety issues
  • Facilities handling combustible dusts, flammable liquids or toxic materials

Industry relevance

Representative PEI Experience

Petroleum Refining · Process Safety

Refinery Relief System Revalidation & Flare Header Update

A refinery required revalidation of its flare and relief system following facility modifications and operating changes.

  • Updated refinery-wide flare simulation models
  • Evaluated credible relief scenarios using applicable standards
  • Performed flare hydraulic analysis and identified backpressure concerns
  • Developed recommendations for relief devices, operating cases and flare constraints
Source: PEI Environmental, Health & Safety Portfolio
Specialty Polymers · Design & Startup

Specialty Polymer Pilot-Plant Detail Engineering and Startup Safety Support

A specialty polymer pilot plant required process engineering, relief system and process safety support before startup.

  • Maintained the process design basis; revised simulations and H&MBs
  • Reviewed P&IDs, control specifications and heat transfer fluid hazards
  • Supported equipment, instrumentation and relief valve finalization
  • Facilitated the final pre-startup HAZOP
Source: PEI Environmental, Health & Safety Portfolio
Important: Process safety studies support a facility owner's own risk management. They do not constitute certification or regulatory approval and cannot guarantee safety outcomes. Responsibility for safe operation and compliance with applicable Pakistani regulations remains with the facility owner.

Frequently Asked Questions

Can PEI facilitate a HAZOP study for our plant in Pakistan?

HAZOP facilitation and participation are listed PEI process safety services. Share the facility, the scope (new design or revalidation) and the status of your P&IDs with Binhashim so the requirement can be discussed with PEI.

What is the difference between HAZOP and LOPA?

A HAZOP is a structured team review that identifies how a process can deviate from design intent and what could result. LOPA is typically used afterwards to assess, semi-quantitatively, whether the independent protection layers for selected high-consequence scenarios are sufficient.

Does PEI perform pressure relief valve sizing and flare studies?

Yes. PSV sizing, relief valve evaluations, relief system revalidation and flare header studies are listed among PEI's services.

Does PEI provide Dust Hazards Analysis?

Yes. Dust Hazards Analysis (DHA) is one of PEI's listed process safety services.

Will a study certify our plant as safe?

No. Process safety studies identify hazards and evaluate safeguards to support the owner's risk management. They are not a certification, regulatory approval or guarantee of safety outcomes.

Project Inquiry

Have a Process Engineering Challenge?

Whether you are planning a new industrial project, expanding an existing facility or seeking independent engineering expertise, connect with Binhashim to discuss your requirements.

Chat on WhatsApp