Representing Process Engineering International, LLC (USA) in Pakistan
Our Services · Process Design

Process Design

From feasibility and conceptual studies through FEED — the process definition your capital project is built on.

Overview

Chemical Process Design for New Projects and Expansions

Chemical process design defines what a plant will do and how: the chemistry and unit operations, the heat and material balance, the equipment and the control and safety philosophy. Decisions made at this stage determine most of a project's capital cost, operability and safety performance.

PEI provides process design services from feasibility and conceptual studies through front-end engineering design (FEED), and supports projects through detailed design, installation and startup. For industrial owners and project developers in Pakistan, this means the project can be defined in detail before EPC bidding or fully engaging an EPC contractor.

Capital Project Lifecycle

Where Process Design Fits

Planning

Feasibility and conceptual studies.

Process Design / Development

FEL-1, FEL-2 and FEL-3 packages.

Detail Engineering & Design

Process support to detail design.

Construction

Process-related changes addressed.

Commissioning / Startup

Plans, procedures and on-site support.

Front-End Process Design Activities

Once a client identifies a project, PEI's process design work includes:

  • Preparing process design documentation (FEL-1, FEL-2, FEL-3)
  • Developing a preliminary cost estimate and identifying process risks
  • Identifying and specifying long lead time equipment
  • Developing equipment sizing
  • Working with the client to identify potential OSBL (outside battery limits) issues at the project location
  • Developing bid packages for future phases

Capital Projects Planning Deliverables

Process Design Basis
Heat and Material Balance
Process Flow Diagrams
Preliminary P&IDs
List of Long Lead Time Items
Preliminary Equipment, Line and Instrument List
Major Equipment Process Specifications
Long Lead Time Equipment Detailed Process Specification for Vendor Submittal
Bid Package Preparation for EPC
Budget-Level Capital and Operating Cost Estimates
Preliminary Environmental Assessment and Summary
Letter Report Regarding Suitability of Project Site
Potential Process Risks Summary Report

PEI's process design scope also lists data sheets and TIC among its process design services. Exact deliverables are agreed for each project.

Detailed Design Support

During detail engineering, PEI helps protect the process intent:

  • P&ID review and update (Issue for Design / Issue for Construction)
  • Critical valve and instrument specifications (control valves, PRVs, analyzers)
  • Addressing or monitoring process-related changes and issues
  • Equipment specifications review and comment
  • Pipe routing and layout drawings review and comment (2D and 3D)
  • Controls functional specification development

Detail design review is performed from a process perspective; PEI does not provide mechanical, electrical or civil detail design.

Installation and Startup Services

  • Commissioning and startup plan development
  • Procedures development and training
  • As-built P&ID development
  • System troubleshooting
  • On-site commissioning and startup support

Why Invest in Front-End Process Design?

Define before you bid

Define the project in more detail before EPC bidding or fully engaging an EPC contractor.

Reduce risk early

Identify potential process issues at the front end, when they are least expensive to address.

Informed capital decisions

Budget-level estimates and a preliminary schedule support well-informed capital appropriation decisions.

Added expertise

Bring additional applied process design expertise to your team and reduce workload peaks for in-house process engineers.

Typical Applications

  • New process units or greenfield facilities requiring a defined process basis
  • Capacity expansions and major revamps
  • Commercialization of new or emerging process technologies
  • Owners who want independent bid packages before EPC tendering
  • Projects requiring process input to environmental permitting and site selection

Industry relevance

Representative PEI Experience

Specialty Polymers · Design & Startup

Specialty Polymer Pilot-Plant Detail Engineering and Startup Safety Support

A specialty polymer pilot plant required process engineering, relief system and process safety support before startup.

  • Maintained the process design basis; revised simulations and H&MBs
  • Reviewed P&IDs, control specifications and heat transfer fluid hazards
  • Supported equipment, instrumentation and relief valve finalization
  • Facilitated the final pre-startup HAZOP
Source: PEI Environmental, Health & Safety Portfolio
Waste Treatment · Independent Review

PFAS Destruction Reactor Technical Safety Evaluation

A hazardous waste management client requested an independent technical and safety evaluation of a new batch reactor system for PFAS waste destruction.

  • Developed heat and material balance for the reactor system
  • Modeled the process and evaluated off-gas handling
  • Electrical area classification review and overpressure / PSV evaluation
  • Identified design changes to improve safe operation
Source: PEI Environmental, Health & Safety Portfolio

Frequently Asked Questions

What is included in a FEED or FEL-3 process package?

Typical process deliverables include the process design basis, heat and material balance, process flow diagrams, preliminary P&IDs, equipment and instrument lists, major equipment process specifications, long-lead equipment specifications, budget-level cost estimates and bid packages for EPC. The exact scope is agreed for each project.

Can PEI prepare bid packages for EPC contractors?

Yes. Bid package preparation for EPC is one of PEI's listed capital projects planning deliverables.

Does PEI do the mechanical or civil detail design?

No. PEI provides chemical process engineering only. During detail design it supports the process aspects — P&ID updates, critical valve and instrument specifications and reviews of equipment specifications and layouts.

Can PEI support commissioning and startup in Pakistan?

PEI lists commissioning and startup plans, procedures and training, as-built P&IDs, troubleshooting and on-site commissioning and startup support among its services. Discuss your project's location and timing with Binhashim to confirm arrangements.

Project Inquiry

Have a Process Engineering Challenge?

Whether you are planning a new industrial project, expanding an existing facility or seeking independent engineering expertise, connect with Binhashim to discuss your requirements.

Chat on WhatsApp