Representing Process Engineering International, LLC (USA) in Pakistan
Our Services · Process Engineering

Process Engineering

Simulation, troubleshooting, debottlenecking and engineering support that help existing plants perform better.

Overview

Chemical Process Engineering for Operating Plants

Operating plants constantly raise process questions: Why is this unit under-performing? What limits capacity? Is the relief system still adequate after the last modification? Can we reduce energy use or emissions?

PEI's process engineering services apply chemical engineering analysis, simulation and hands-on plant experience to answer these questions, helping owners improve throughput, efficiency, reliability and environmental performance.

Process Engineering Services

Simulation & Analysis

  • Process simulation — steady state
  • Process simulation — dynamic
  • Test protocol / DOE development
  • Process improvement technical and economic alternatives evaluations

Operating Plant Support

  • Process troubleshooting
  • Plant operations support
  • On-site process engineering support
  • Existing facility PFD / P&ID updates or development
  • Process monitoring and controls upgrades

Capacity & Efficiency

  • Process debottlenecking
  • Debottlenecking studies
  • Utilities / hydraulic evaluations
  • Energy and utility optimization
  • Plant troubleshooting and performance recovery

Relief, Flare & Code Reviews

  • PRD / PSV evaluations
  • Flare header evaluations
  • Safety / code reviews

Environmental Process Engineering

Environmental performance is evaluated through the same process lens — connecting air, water and waste issues to facility design and operation.

  • Emissions estimating, including during process design
  • Emissions control systems evaluations
  • Plume dispersion modeling
  • Air pollution control device specification and process design
  • Scrubber system evaluation and improvements
  • Vent and odor-control system analysis
  • Industrial wastewater treatment process design and modifications
  • Waste stream characterization, waste management and hazardous waste processing support
  • Process optimization to reduce waste, emissions, flaring and resource consumption

Engineering Tools

PEI uses state-of-the-art process engineering tools, including simulation software from CHEMCAD and AspenTech, DNV, M-Star and ExtendSim software, Autodesk AutoCAD, and PEI's in-house PSV workbook.

Typical Situations Where Process Engineering Adds Value

  • Major revamp or capacity expansion planning
  • Recurring process, reliability, operability, emissions or waste generation issues
  • P&IDs and process documentation that no longer reflect the plant
  • Utility constraints or high energy consumption
  • Relief system revalidation or flare system constraint evaluation after changes
  • Scale-up of a process from pilot to commercial operation

Industry relevance

Representative PEI Experience

Specialty Polymers · Optimization

Specialty Batch Polymer Process Evaluation, Optimization and HSE Review

A client needed to increase throughput while maintaining product quality and managing HSE considerations as the process matured toward commercial scale.

  • Preliminary material balance and simulation model
  • Identified throughput bottlenecks in existing and new lines
  • Evaluated equipment upgrades and operating condition changes
  • Recommended instrumentation, automation and HSE improvements
Source: PEI Environmental, Health & Safety Portfolio
Petroleum Refining · Capacity

Crude Distillation Unit Preliminary Capacity Evaluation

Preliminary evaluation of an existing petroleum refinery crude distillation unit (Western U.S.) for potential revamp opportunities to increase throughput. Executed by PEI's U.S. parent company, Process Engineering Associates, LLC.

  • Scope covered the pre-heat train, desalter, three distillation towers (primary, secondary, debutanizer), three feed heaters and associated equipment
Source: PEI General Introduction (project history published by PEI)
Existing Operation · Emissions

Packed Scrubber System Improvements

Evaluation and design of process improvements to reduce fugitive hazardous gas emissions in an existing operation.

  • Diagnosed scrubber packing fouling and tank overpressure as contributors
  • Developed a scrubber and vent-system improvement strategy
  • Recommended process modifications to reduce fugitive emissions
Source: PEI Environmental, Health & Safety Portfolio
Terminals · Environmental

Vent System Analysis for an Odor-Control System

Independent analysis of feedstock storage tank, slop tank and common vent header systems for a bioproducts terminal.

  • Best-estimate vent loadings to a downstream odor-control system
  • Normal and limiting operating scenarios evaluated
  • Vent-stream composition, phase, temperature and flow estimated
Source: PEI Environmental, Health & Safety Portfolio

Frequently Asked Questions

What is a debottlenecking study?

A debottlenecking study identifies which equipment or systems limit a plant's capacity and evaluates the changes needed to increase throughput — often using a process simulation model calibrated to plant data. PEI lists debottlenecking studies among its process engineering services.

Does PEI offer both steady-state and dynamic simulation?

Yes. PEI lists steady-state and dynamic process simulation among its process engineering services.

Can PEI update old or inaccurate P&IDs?

Yes. Existing facility PFD and P&ID updates or development, and as-built P&ID development, are listed PEI services.

Can engineers support us on site?

On-site process engineering support is one of PEI's listed services. Discuss your location, timing and scope with Binhashim.

Project Inquiry

Have a Process Engineering Challenge?

Whether you are planning a new industrial project, expanding an existing facility or seeking independent engineering expertise, connect with Binhashim to discuss your requirements.

Chat on WhatsApp